 |
|
|
|
|
ARFF Pumps: Model CR
The Most Durable and Dependable ARFF Pump in the Industry. |
|
The rugged and reliable Waterous CR single-stage centrifugal fire pump provides the discerning ARFF pro a large capacity, pedestal-mounted (CR model) or a chain-driven with (CRQA), end suction unit rated at 2050 GPM @ 250 PSI (7800 L/min @ 17 bar). The CR, like all of our pumps, is tested at full power prior to shipment to ensure it meets the demanding Waterous standard. The CR pump is also backed by an industry exclusive five-year warranty. |
Model CR
|
|
| |
|
| |
|
- Gray iron (bronze optional), vertically-split volute body with optional gray iron transmission.
- Transmission is equipped with a Morse HV® high strength involute form chain.
- 17-4 stainless steel impeller shaft, heat-treated, machined and ground to precision.
- Oil-splash lubricated, deep-groove ball bearings located outside the pump casing to accurately align and support the impeller shaft assembly.
- Fully-enclosed, bronze, double-hubbed precision-balanced impeller.
- Bronze replaceable wear rings to increase pump life and minimize maintenance costs.
- Standard 8" Victaulic® intake.
- 5" Victaulic® discharge.
- Discharge positions available in 25 degrees below horizontal, horizontal or vertical.
- Mechanical seal is standard.
- Intake side-mounting bracket (optional).
- Direct drive with 1.750-10 spline for Spicer 4-4-3811 series end yoke.
- 5-year warranty.
|
< Back to top |
| |
|
|
| |
|
| |
|
- Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
- Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
- Manifold Drain Valve Drains all points of the pump simultaneously with the operation of a single control.
- Corrosion Protection: Replaceable zinc element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the zinc element to galvanic corrosion.
- Discharge Valves: Waterous ball-type discharge valves available in 2.5" and 3.5".
- Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition.
|
< Back to top |
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
sales&service@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
sales&service@waterousco.com |
< Back to top |
| |
|
|
