 |
|
|
|
|
Air Compressor Modules Model: 250-150-P
Performance Enhancing Integrated Pump/Compressor Systems. |
|
PTO-driven, integrated water pump / air compressor designed specifically for installation in fire apparatus. 250-150-P develops a minimum of 250 GPM of water at 125 PSIg (473 L/min @ 8.6 bar) and 150 CFM of air at 125 PSIg (4.25 m3/min @ 8.6 bar) simultaneously. The 250-150-P is also backed by an industry exclusive five-year warranty. |
Model 250-150-P
|
|
| |
|
| |
|
Air Compressor
- GHH-Rand air compressor, oil−flooded, rotary screw type, sized to supply a minimum of 150 sCFM (4.25 m3/min) of usable air.
- Pneumatic Modulating Inlet Valve controls air delivery while maintaining constant pressure.
- Auto Sync™ Balancing System automatically maintains the air pressure within +/− 5% of the water pump pressure throughout the pressure range.
- Air Compressor Oil System contains a spin−on, full−flow oil filter unit and a thermostatic valve to control oil flow to the cooler.
- Air / Oil separator head assembly with spin-on cartridge.
- Air Compressor Cooling System uses the unit’s water pump, a copper and brass shell and tube heat exchanger to cool the compressor. The system maintains recommended operating temperatures throughout the full operational range in ambient temperatures up to 115°F (46.1°C). A “fail safe” switch precludes engagement of the compressor PTO unless the fire pump is engaged.
- Air Compressor Transmission consists of a Poly-Chain drive with an manual tensioner and 8mm pitch sprockets.
Pump Specifications
- High-tensile, gray iron Waterous CPK−2 centrifugal fire pump with bronze impeller, replaceable wear rings and maintenance−free mechanical seals.
- Intake and Discharge: 3 inch intake, 2 inch discharge
Panel Mounted Instruments
- The following items and controls are provided for installation on the pump operator’s panel:
- Air compressor PTO engagement switch (OEM provided)
- AutoSync compressor controls w/engraved instruction plate
- Air compressor oil temp. gage w/warning light and alarm
- CAF system air pressure gage
- Air flow meter (optional)
- An air valve for each compressed air foam discharge
- 5-year warranty
|
< Back to top |
| |
|
|
| |
|
| |
|
- Priming System: Pneumatic oil−free primer capable of priming the water pump through 20 feet (6 m) of 2−1/2 (63.5 mm) inch hard intake hose with a 10 foot (3 m) lift. Controls are mounted on the operator’s panel.
- Pressure Relief: An optional pressure relief system is available to comply with NFPA 1906 standards.
- Foam Systems: Aquis™ Foam Proportioner or Advantus® Foam System.
- On-site operation and maintenance instruction. Contact factory for pricing.
|
< Back to top |
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
sales&service@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
sales&service@waterousco.com |
< Back to top |
| |
|
|
