500-150-P PTO-Driven Integrated CAF/Air Compressor Systems.
Waterous’ 500-150-P PTO-driven, integrated water pressure pump / air compressor is designed and assembled specifically for installation in fire apparatus. The 500-100-P simultaneously develops a minimum of 500 GPM of water at 125 PSIg (1900 L/min. @ 8.6 bar) and 150 CFM of air at 125 PSIg (4.25 m3/min @ 8.6 bar). Combined with the suppression capabilities of foam, air and water, the 500-100-P system provides superior performance.
Low Maintenance
With our exclusive 5-year warranty, we can repair the 500-150-P PTO-driven integrated water pump / air compressor system and put you back in service faster than apparatus equipped with other brands of compressed air foam systems. Your 500-150-P service and maintenance needs covered with our skilled staff of factory technicians.
Options & Accessories
The Waterous 500-150-P PTO-driven integrated water pump / air compressor systems come with a variety of options to fit the needs of your fire department and easily interface with numerous accessories. Combined with a Waterous Aquis™ Foam Proportioner or Advantus® Foam System make the power take-off 500-150-P a crucial tool for maximizing your fire suppression capabilities. An optional pressure relief system and priming system are also available.
Product Orientation & Integration
Waterous factory personnel provide on-site product operation and maintenance instruction, so implementing 500-150-P PTO-driven integrated water pump / air compressor systems is easy. Eliminate the learning curve of integrating CAFSystems™ into your fire department’s daily operations our product orientation and integration education. Contact your Waterous representative for exclusive pricing on courses today.
Specifications
Air Compressor
- GHH-Rand air compressor, oil−flooded, rotary screw type, sized to supply a minimum of 150 sCFM (4.25 m3/min) of usable air.
- Pneumatic Modulating Inlet Valve controls air delivery while maintaining constant pressure.
- Auto Sync™ Balancing System automatically maintains the air pressure within +/− 5% of the water pump pressure throughout the pressure range.
- Air Compressor Oil System contains a spin−on, full−flow oil filter unit and a thermostatic valve to control oil flow to the cooler.
- Air / Oil separator head assembly with spin-on cartridge.
- Air Compressor Cooling System uses the unit’s water pump, a copper and brass shell and tube heat exchanger to cool the compressor. The system maintains recommended operating temperatures throughout the full operational range in ambient temperatures up to 115°F (46.1°C). A “fail safe” switch precludes engagement of the compressor PTO unless the fire pump is engaged.
- Air Compressor Transmission consists of a Poly-Chain drive with an manual tensioner and 8mm pitch sprockets.
Pump Specifications
- High-tensile, gray iron Waterous CLVK centrifugal fire pump with bronze impeller, replaceable wear rings and maintenance−free mechanical seals.
- Intake and Discharge: 4 inch Victaulic intake, 3 inch NPT discharge
Panel Mounted Instruments
- The following items and controls are provided for installation on the pump operator’s panel:
- Air compressor PTO engagement switch (OEM provided)
- AutoSync compressor controls w/engraved instruction plate
- Air compressor oil temp. gage w/warning light and alarm
- CAF system air pressure gage
- Air flow meter (optional)
- An air valve for each compressed air foam discharge
< Back to Top
Options and Accessories
- Priming System: Pneumatic oil−free primer capable of priming the water pump through 20 feet (6 m) of 2−1/2 (63.5 mm) inch hard intake hose with a 10 foot (3 m) lift. Controls are mounted on the operator’s panel.
- Pressure Relief: An optional pressure relief system is available to comply with NFPA 1906 standards.
- Foam Systems: Aquis™ Foam Proportioner or Advantus® Foam System.
- On-site operation and maintenance instruction. Contact factory for pricing.
< Back to Top
Download Product Literature
Product Brochures:
Operational Guide:
< Back to Top
Sales/Application/Service Help
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
pumpsales@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
service@waterousco.com
< Back to Top
