In the flexible CZ/CZU pumps, Waterous provides ARFF specialists pedestal-mounted, single-stage centrifugal fire pumps with water delivery performances up to 950 GPM @ 260 PSI (3600 L/min. @18 bar) with 5" Victaulic® inlet or (CZU) up to 1500 GPM @ 250 PSI (5700 L/min @ 17 bar) with 6" Victaulic® inlet. With vertically-split cases, the CZ pump offers easy operation and simplified maintenance.

CZ (Rear View)

More Views

  • CZ (Rear View)
  • CZU (Front View)
  • CZU (Rear View)
  • GOST R52283-2004 Russian Product Certification (CZ Models Only)
  • Meets or Exceeds National Fire Protection Association Standards
  GPM L/min L/sec PSI Bar kPa MPa
CZ 950 3600 60 260 18 1800 1.8
CZU 1500 5700 95 250 17 1700 1.7


  • High-tensile gray iron (bronze optional), vertically-split casing.
  • 17-4 stainless steel impeller shaft, heat treated, machined and ground to precision.
  • Oil-splash lubricated, anti-friction deep-groove ball bearings, situated outside the pump casing for accurate alignment.
  • Fully-enclosed, bronze, double-hubbed, precision-balanced impeller.
  • Bronze replaceable wear rings to increase pump life and minimize maintenance costs.
  • 5" Victaulic® intake (CZ model) or 6" Victaulic intake (CZU model).
  • Horizontal or vertical discharge positions, with a 4" ANSI flange for an O-ring seal (CZ model) or 4" Victualic® (CZU model).
  • Direct drive with 1.97-10 spline for Spicer 3-4-3051 end yoke.
  • Mechanical seal is standard.
  • 5-year warranty

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve Drains all points of the pump simultaneously with the operation of a single control.
  • Corrosion Protection: Replaceable zinc element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the zinc element to galvanic corrosion.
  • Discharge Valves: Waterous ball-type discharge valves available in 2.5" and 3.5".
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.


CZ / CZU Series
Dimensional Drawings Data Sheet Instructions Performance Curves

Service Parts Lists

Specification Sheet


Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

© Copyright Waterous 2017 | All Rights ReservedDisclaimer