TMR - Reversing Transmission for Hi-Rail Applications

To show the diversity of Waterous products, we developed a transmission for a vehicle which can operate both on rail tracks and a conventional road. The Hi-Rail, from highway and rail equipped with a Waterous TMR Transmission allows the vehicle to travel forward or backwards without having to change the vehicle’s transmission setting saving wear and tear on the vehicle transmission.

TMR - Reversing Transmission Hi-Rail Application

More Views

  • TMR - Reversing Transmission
  • TMR - Reversing Transmission Hi-Rail Application

Case:  

High-tensile gray iron

Driveline – Input Shaft:

Standard:

Input and output shafts are 1-3/4 SAE 10 spline, a four bolt series 1500 companion flange is supplied at input end of shaft. 

Drive shafts are made of forged, hardened and ground alloy steel.

Optional:              

  • 2-10 SAE spline

Output Shaft:

Standard:

  • 1-3/4 SAE spline

Optional:

  • 1–3/4–10 SAE spline with 9” parking brake provision
  • 2-10 SAE spline
  • Output to front, rear or both
  • Front output rotation - clockwise
  • Rear output rotation - counterclockwise

Bearings: 

Oil lubricated ball bearings throughout.

Gears:  Constant mesh helical, alloy steel.  All gears are crown shaved, carburized and hardened.  The bores are precision ground.

Chain:

Morse H-V®

Lubrication:

A splash system within the case lubricates the bearings, chain and other moving parts.  Use automatic transmission fluid.  Approximate capacity is 5 quarts.

Shift Mechanism:

Constant mesh, two position sliding collar that engages all teeth simultaneously and is self-locking.


 

Companion Flanges:

Description

Use   On:

1500 Series Companion Flange (1-3/4-10 SAE   Spline)

1-3/4-10 SAE Splined Output Shaft

1700 Series Companion Flange (2-10 SAE   Spline)

2-10 SAE Spline Input and Output Shafts


Parking Brake:

Bendix Duo-Duty, available as follows:

1-3/4-10 SAE Driveline

  • 9 x 3 for 1500 series U-joints

 

            

TMR Transmission
Dimensional Drawings Data Sheet Instructions Service Parts Lists Spec Sheets

 

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com

© Copyright Waterous 2017 | All Rights ReservedDisclaimer