The Aquis™ Foam Proportioner from Waterous delivers a level of performance and reliability typically reserved for more expensive Class A foam proportioning systems. Available in two sizes (Aquis™ 1.5 and Aquis™ 2.5) to fit your fire department’s needs, Aquis features a non-corroding brass body pump as well as sensors that measure water temperature and water flow to create the ideal water-to-concentrate ratio for a superior foam solution. Dollar for dollar and feature for feature, there’s no doubting that Aquis is the finest foam proportioner system on earth.
Aquis™ 1.5 Foam Proportioner
The perfect blend of performance and value, the Aquis™ 1.5 foam proportioner outputs foam at a capacity of 1.5 GPM @ 150 psi (5.7 L/min. @ 32 bar) with a 1/3 HP (.27 kW) pump motor.
Aquis™ 2.5 Foam Proportioner
The Aquis™ 2.5 foam proportioner offers the next level of power with a foam output capacity of 2.5 GPM @ 150 psi (9.5 l/min @ 32 bar) with a 1/2 HP (.40 kW) pump motor.
Low Maintenance
Supported by a 1-year factory warranty, we’ve got your Aquis™ service and maintenance needs under control. The power behind the Aquis™ Foam Proportioners can be repaired and back in service faster than apparatus equipped with other brands of foam proportioning systems.
Options & Accessories
Complimenting the Aquis™ foam proportioners is the Waterous FoamFill™ Foam Tank Refill System that can be used with both Class A and B foam. When turned on, a microcontroller inside the FoamFill™ identifies the foam levels in the tank or tanks. If the levels are low, FoamFill™ automatically fills them without overflowing, operating at a capacity of 10 GPM (37.8 L/min.). A flowmeter tee (2” ID on the Aquis™ 1.5 and 2.5” ID on the Aquis™ 2.5), waterway check valve, low-level tank switch, and system diagram and rating placards (per NFPA 1901) for pump panel mounting are also available.
Determining what your department needs for foam proportioning and accessories is challenging. Contact your Waterous representative today, and we’ll answer all your questions.
|