 |
|
|
|
|
Industrial Pumps: Model CP-4
Knock Out Fires Quickly With High Pressure Fog. |
|
This ultra high-pressure performer is a lightweight four-stage centrifugal pump that delivers 60 GPM (227 l/m) at 1000 PSI (69 Bar) to produce high-pressure fog, which can knock out fires quickly while the pumper is either in motion or stationary. The diverse features of the CP-4 pump make it ideal where high-pressure pump performance is required. |
Model CP-4
|
|
| |
|
| |
|
- Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings (bronze optional).
- Ni-resist; special “stepped” design to reduce internal leakage and increase efficiency. Replaceable by undersize rings to prolong pump life and minimize maintenance costs.
- Bronze, hydraulically and mechanically balanced impellers, one integrally cast pair for the first and second stages and another for the third and fourth stages. Impeller hubs are “stepped” to minimize internal bypass.
- Stuffing boxes with adjustable braided flexible graphite (BFG) packing.
- Rotation available with either clockwise or counter-clockwise rotation of input shaft.
- Bearing are all oil or grease lubricated, anti-friction (ball type), located outside the pump casing to accurately align and support the impeller shaft assembly. Ball bearings are deep-groove type designed to carry both radial and axial thrust.
|
< Back to top |
| |
|
|
| |
|
| |
|
- Primer: Select an electric rotary vane primer for fast, reliable priming.
- Drain valve: Manifold drain valve simultaneously drains all points of the pump by operating a single control.
- Corrosion protection: Waterous offers replaceable zinc elements to provide corrosion protection. Without this protection, galvanic corrosion may damage the iron pump body and fittings.
- Zinc intake screens: These are installed directly in the intake fitting openings and also provide protection from debris in the water supply.
- Zinc anodes: These are installed directly on the pump intake piping and consist of two anodes that protrude into the pump waterway.
|
< Back to top |
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
sales&service@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
sales&service@waterousco.com |
< Back to top |
| |
|
|
