 |
|
|
|
|
Industrial Transmissions: Model TMR
Reliable Reverse Transmissions. |
|
The Waterous TMR transmission is a reverse transmission used for high-rail applications. Designed for installation in a vehicle between the main transmissions and rear axle to provide reverse vehicle motion with the main transmission in forward gears. In forward, power is transmitted directly through the TMR transmission to the rear axle with input and output shafts rotating in the same direction. When in reverse, power is transmitted through a chain drive to a countershaft and then through gearing to the output shaft. The output shaft rotates opposite the input. When the TMR transmission is operated in either mode it allows the vehicle’s main transmission to be operated in any desired gear. |
Model TMR
|
|
| |
|
| |
|
- Case is high-tensile gray iron.
- Driveline input and output shafts are 1-3/4 SAE 10 spline, a four bolt series 1500 companion flange is supplied at input end of shaft. Drive shafts are made of forged, hardened and ground alloy steel. 2-inch SAE 10 spline is optional.
- Torque rating 1-3/4 inch input, 4100 lb-ft, reverse mode 3350 lb-ft. 2 inch input 6100 lb-ft, reverse mode 3350 lb-ft.
- Chain is Morse H-V®.
- Gears are helical type.
- Lubrication comes from a splash system within the case that lubricates the bearings, chain and other moving parts. Use automatic transmission fluid. Approximate capacity is 5 quarts.
- Shift mechanism is constant mesh, two position sliding collar that engages all teeth simultaneously and is self-locking.
|
< Back to top |
| |
|
|
| |
|
| |
|
- Parking brake: A 9-inch brake provision is available for the 1-3/4 inch driveline for 1500 series U-joints.
|
< Back to top |
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
sales&service@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
sales&service@waterousco.com |
< Back to top |
| |
|
|
