 Deicing, insulator washing and sewer jetting are just a few uses for Waterous’ heavy-duty industrial pumps and transmissions. From the largest refinery pigging operation to the smallest street washer, Waterous has the industrial pump and transmissions for high-pressure, powerful water delivery to do your job right the first time.
Pump Selection Guide
Select the Industrial Pump that’s right for you. If you can't find what you are looking for or if you have custom specifications to fit, give us a call and one of our knowledgeable sales representatives will be happy to assist you.
Transmission Selection Guide
Industrial Pumps
CP-2 Model
Adaptable to pump-and-roll operation, the CP-2 will supply two or more lines with adequate pressure for use with either straight stream or fog nozzles. The CP-2 is normally driven by a transmission side-mounted PTO or, as an option, can be bell-house mounted.
CP-3 Model
The CP-3 can be used as an auxillary pump to provide “booster” service on an apparatus that also has a rated midship pump, or as the only pump on a mini-pumper, tanker, brush truck or other special purpose vehicle. The CP-3 delivers hard-hitting “pump-and-roll” capabilities that extinguish grass or brush fires quickly and efficiently.
CP-4 Model
This ultra high-pressure performer is a lightweight four-stage centrifugal pump that delivers 60 GPM (227 l/m) at 1000 PSI (69 Bar) to produce high-pressure fog, which can knock out fires quickly while the pumper is either in motion or stationary.
CMU Model
The CMU offers flexibility that you won’t find in most pumps. A powerful tool used to knock down even the most dangerous of fires, the CMU is also highly effective for use in pigging and irrigation applications.
CX Model
The Waterous CX pump is for those in need of a tough, all-around, yet easy-to-use single-stage end-suction unit as their main pump. Designed for mounting on ARFF trucks and fire boats and driven by a PTO, the CX pump can also be front-mounted or direct-driven.
Transmissions
TMR Reversing Transmission
The Waterous TMR transmission is a reverse transmission used for high-rail applications. The TMR is designed for vehicle installation between the main transmissions and rear axle to provide reverse vehicle motion with the main transmission in forward gears.
TML Split-shaft PTO
The Waterous TML is a full-torque, split-shaft power take-off with counter-enginewise rotation. TML also has output to the front, rear or both and has five available ratios.
TC10 Chain PTO
The Waterous TC10 transmission is a chain drive power take-off with a housing constructed of high-strength aluminum. Drive and driven sprokets are made of hardened steel and have ground bores. Shafts are made of alloy steel forgings, hardened and ground to size.
Contact your Waterous representative today and find out how industrial pumps and transmissions for powerful water delivery.
|
