TML Power Take-Off

The TML Power Take-off is designed for driving a wide variety of heavy duty, truck mounted power equipment. When mounted in the chassis drive line, they are capable of transmitting full torque to the rear axle, as multiplied by the transmission. With the transmission in “direct drive” they transmit full engine power to the equipment being driven.

TML Power Take-Off

More Views

  • TML Power Take-Off

Ratio

Output Shaft Speed (RPM)

200

500

1000

1500

2000

2500

3000

3500

0.71

45

80

140

150

150

 

 

 

0.88

40

75

130

145

150

150

 

 

1.04

35

70

120

140

145

150

150

 

1.29

30

65

110

135

140

150

150

150

1.59

27

58

95

127

137

147

150

150

The TML has outputs to 150 HP (112kW) and thru torque to 9100 ft. lb (12,400 N•m).

Case:   High-tensile gray iron

Driveline: Standard:

1-3/4-10 SAE spline, 4100 ft-lb torque rating

Optional: 

  • 2-10 SAE spline, 6100 ft-lb torque rating
  • 2-38T involute spline, 9100 ft-lb torque rating

Bearings:  Oil lubricated ball bearings throughout.  

Output Shaft:

  • 1-3/8 spline with yoke
  • Output to front, rear or both
  • Front output rotation - clockwise
  • Rear output rotation - counterclockwise

Gears:  Constant mesh helical, alloy steel.  All gears are crown shaved, carburized and hardened.  The bores are precision ground.

 

TML PTO Information
Dimensional Drawings Data Sheet Instructions Service Parts Lists Spec Sheets

 

© Copyright Waterous 2017 | All Rights ReservedDisclaimer