Home | Our Company | Contact Us
Waterous
 

Pumping On the Go.

Provide true “pump and roll” capability while reducing transmission wear on your apparatus by adding a PTO fire pump to your firefighting arsenal. Available in multiple sizes and styles, Waterous has a PTO fire pump to fir your requirements and apparatus set-up perfectly.CPK-2

 

CP-2

Driven by a transmission side mounted PTO, the CP2 can also be powered by optional direct-engine mount. Able to accommodate multiple lines for straight stream of fog nozzles.

 

CP-2
FLOW
PRESSURE
GPM
l/min
PSI bar kPa MPa
MAXIMUM FLOW
300
1135
150 10 1000 1.0
MAXIMUM PRESSURE
60
227
400 28 2750 2.75
  • High tensile, close-grained iron casing (bronze/gunmetal optional), one-piece volute body
  • 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)
  • Bronze double-hubbed precision-balanced impeller
  • 3-inch (76.2mm) NPT or BSP intake; 2-inch (50mm) NPT or BSP discharge (BSP threads available straight
  • Multiple gearbox mounting positions (horizontally, vertically or inverted)
  • Seven optional speed-increasing transmission ratios
  • Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears
  • Available transmission models consist of a close-grained, gray iron casing with constant-mesh, stainless steel helical gears
  • 5-year warrantyCP-3

 

CP-3

A compact two-stage pump with “pump and roll” capability, making it ideal for extinguishing grass and brush fires.

 

CP-3
FLOW
PRESSURE
GPM
l/min
PSI bar kPa MPa
MAXIMUM FLOW
500
1900
150 10 1000 1.0
MAXIMUM PRESSURE
60
227
800 55 5500 5.5
  • High tensile, close-grained gray iron casing (bronze / gunmetal optional), one-piece volute body
  • Bronze double-hubbed, precision-balanced impellers
  • Separable impeller shaft for ease of serviceability
  • Push-pull manual bronze transfer valve (in bronze housing)
  • Available in either rotation of input shaft
  • 4 inch NPT (101.4mm) tee adapter intake; two 2 inch (50mm) or 2.5 inch (64mm) NPT tee adapter (or 2.5 inch (64mm) tapped flange) discharge
  • PTO or direct engine bell housing mount
  • Available transmission models consist of a close-grained, gray iron casing with constant-mesh, stainless steel helical gears
  • Seven optional speed-increasing transmission ratios
  • 5-year warrantyo

 

 

CP-4

An ultra high-pressure, lightweight, 4-stage centrifugal pump. Able to produce high-pressure fog while the pumper is in motion or stationary.

 

CP-4
FLOW
PRESSURE
GPM
l/min
PSI bar kPa MPa
MAXIMUM PRESSURE
90
341
1350 93 9300 9.3
  • High-tensile, close-grained gray iron (bronze/gunmetal optional), two-piece, horizontally-split volute body
  • Ni-resist; special “stepped” designed wear rings reduce internal leakage & increase efficiency
  • Bronze, hydraulically and mechanically balanced impellers
  • Impeller hubs are “stepped” to minimize internal bypass
  • Adjustable braided flexible graphite (BFG) packing
  • Available with either clockwise or counter-clockwise rotation of input shaft
  • Available transmission models consist of a close-grained, gray iron casing with constant-mesh, stainless steel helical gears

CG

 

CG

The single-stage design with vertically split volute and pump transmission provides simple operation, easy maintenance and high-reserve capacity.

 

CG
FLOW
PRESSURE
GPM
l/min
PSI bar kPa MPa
MAXIMUM FLOW
750
2850
150 10 1000 1.0
MAXIMUM PRESSURE
80
300
350 24 2400 2.4
  • High-tensile, close-grained iron (bronze optional), two-piece, vertically-split volute body17-4 stainless steel, heat-treated impeller shaft
  • Fully-enclosed, bronze, double-hubbed, precision-balanced impeller (flame-plated hubs optional)
  • Victaulic®, threaded or flanged intake connections
  • Self-adjusting corrosion- and wear-resistant mechanical seals
  • Bronze replaceable wear rings
  • Face-type, self-adjusting corrosion- and wear-resistant mechanical seals
  • Available with four transmission models (K, T, PA and C20)
  • 5-year warrantyCX

 

CX

A single-stage end-suction pump for ARFF trucks and fire boats. Midship mounted and driven by a PTO drive, the CX can also be front-mounted or direct-driven.

 

CX
FLOW
PRESSURE
GPM
l/min
PSI bar kPa MPa
MAXIMUM FLOW
750
2850
150 10 1000 1.0
MAXIMUM PRESSURE
1500
5700
150 10 1000 1.0
  • High-tensile, close-grained gray iron (bronze/gunmetal optional), two-piece, vertically-split volute body
  • Constant mesh, helical gears made of alloy steel
  • 17-4 stainless steel, heat-treated impeller shaft
  • Fully-enclosed, bronze, double-hubbed, precision-balanced impeller
  • Bronze replaceable wear rings
  • Self-adjusting corrosion- and wear-resistant mechanical seals
  • Optional crosspipe intake fitting allows for maximum flow of 1500 GPM (5700 L/min)
  • Available with four transmission models (K, T, PA and C20)
    - K and T models consist of a close-grained, gray iron casing with constant-mesh, helical gears
    - PA and C20 models consist of an aluminum case and are chain-driven
  • 5-year warranty

CL

 

CL

One-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.

 

CL
FLOW
PRESSURE
GPM
l/min
PSI bar kPa MPa
MAXIMUM FLOW
500
1900
150 10 1000 1.0
MAXIMUM PRESSURE
80
300
350 24 2400 2.4
  • High-tensile, close-grained gray iron (bronze/gunmetal optional), one-piece volute body
  • 17-4 stainless steel, heat-treated impeller shaft
    Bronze, double-hubbed, precision-balanced impeller
  • Maintenance-free, self-adjusting shaft seal
  • Choice of 4-inch (101.4mm) NH or BSP threaded-end intake
  • Multiple transmission mounting options (front housing, bell housing, direct or PTO)
  • Available transmission models consist of a close-grained, gray iron casing with constant-mesh, stainless steel helical gears
  • 5-year warranty

 

 

© 2010 Waterous Company. All rights reserved.

Waterous