 |
|
|
|
|
|
Motor Pumps: PB18-4025-B
Your All-Around Transfer and Supply Pump. |
|
The PB18-4025B is a versatile transfer and supply pump mated to a Briggs & Stratton® V-Twin, 18 HP (13.4 kW) engine delivering performances of 150 GPM @ 90 PSI (600 L/min @ 6.5 bar) to 250 GPM @ 70 PSI (1000 L/min @ 4.8 bar). |
Model PB18-4025-B
|
|
| |
|
| |
|
- Briggs & Stratton, model 356447, Vanguard V-Twin air-cooled, overhead valve (OHV) design delivers a maximum output of 18 hp (13.4 kw) @ 3600 RPM. 34.75 cu. In. (570 cc) displacement, 4-cycle, gasoline-fueled, horizontal shaft.
- 4-inch male, British round thread with cap and chain intake.
- Discharge: 2-1/2-inch British instantaneous coupling with ball valve.
- Operator’s panel includes discharge pressure gauge, compound intake pressure gauge, low oil pressure warning light, start and stop control, speed control, panel light and 12-volt outlet.
- Volute body and head with high-strength aluminum alloy, anodized for superior corrosion resistance.
- Impeller is high-strength, corrosion-resistant bronze, fully-enclosed, double-hubbed to balance hydraulic thrust and mechanically balanced to eliminate vibration.
- Long-wearing bronze wear rings. Easy to replace.
- High-strength stainless steel shaft sleeve.
- Spring-loaded mechanical type shaft seal.
- Combination spark arresting muffler and exhaust primer that is fast and easy to use.
- Remote 3-gallon (11 liter) tank with fuel level gauge (optional on no base and rail base)
- Integral 3-gallon (11 liter) fuel tank standard with wrap-around base.
- Full pressure lubrication system with an automotive-style oil filter. Oil fill tube with dipstick.
- 12-volt electric starter with manual recoil.
- 16-amp alternator.
|
< Back to top |
| |
|
|
| |
|
| |
|
- Mast light (wrap-around base only)
Dimensions
US measurements
| Base |
Length |
Width |
Height |
Weight (Dry) |
Weight (Ship) |
| Rail |
24" |
18.75" |
21" |
121lbs. |
149lbs. |
| Wrap-Around |
30" |
20.5" |
21.5" |
143lbs. |
171lbs. |
| No Base |
23.75" |
18.75" |
20" |
116lbs. |
144lbs. |
Metric
| Base |
Length |
Width |
Height |
Weight (Dry) |
Weight (Ship) |
| Rail |
61cm |
47.6cm |
53.3cm |
55kg |
67.7kg |
| Wrap-Around |
76.2cm |
52.1cm |
54.6cm |
65kg |
77.7kg |
| No Base |
60.3cm |
47.6cm |
50.8cm |
52.6kg |
65.3kg |
|
< Back to top |
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
sales&service@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
sales&service@waterousco.com |
< Back to top |
| |
|
|
|
|
