 |
|
|
|
|
Portable Pumps: Floto-Pump™
Mobile Forest Fire Suppression. |
|
The Waterous Floto-pump™ was originally developed to meet the rugged demands of the United States Forest Service and is now also used for marine service, dewatering, pool maintenance, environmental clean-up and irrigation. Weighing only 42 lbs. (19.1 kg), the pump is easily carried by one person. Our Floto-Pumps are available in two models, Standard and High Pressure (Forest Service). The Standard Floto produces maximum pressures of 105 PSI (7 bar) and maximum flows of 140 GPM (530 L/min) while the High Pressure Floto throws a stream of water over 85 feet (26 m) at 170 PSI (12 bar) and produces maximum flows of 60 GPM (230 L/min). Both versions of the Floto-pump are powered by U.S. Motor Power "Power Bee" engine. |
Floto-Pump™ model
|
|
| |
|
| |
|
- 8 hp U.S Motor Power "Power Bee" Model 82029, air-cooled, two-cycle engine with recoil starter ("D" handle), pressure carburetor with integral fuel pump, solid-state ignition, automatic float controlled throttle and compression release valve for easier starts.
- Water-resistant air cleaner and muffler.
- U.S. Forest Service Qualified Specification (no. S100-00275) pump is encased in anodized aluminum with a built-in intake screen.
- Bronze impeller on Standard Floto-pump. Aluminum impeller with Ni-resistant wear rings on High Pressure Floto-pump.
- Face-type mechanical seal requires no adjustment.
- 1.5 inch discharge with NH, NPSH or BSP threads available.
- Float assembly made of a high-density polyethylene shell filled with polyurethane foam.
- 5 quart (4.7L) fuel tank capacity gives 1 to 1.5 hours running time on an unleaded gas/oil mix.
- 2-year parts and service warranty on Engine.
|
< Back to top |
| |
|
|
| |
|
| |
|
- 1.5" Forestry fire hose
- Nozzle
- Spanner wrench
Dimensions:
- Size: 28" (71.1cm) X 16" (40.6cm) X 20" (50.8cm)
- Weight: 42lbs.(19.1kg) dry weight; 51lbs. (23.1kg) shipping weight.
|
< Back to top |
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
sales&service@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
sales&service@waterousco.com |
< Back to top |
| |
|
|
