CX Vehicle-mounted SIngle-Stage Fire Pumps.

• High-tensile, close-grained iron (bronze optional), two-piece, vertically-split volute body, with optional high-tensile, close-grained gray iron transmission casing.
• Transmissions use constant mesh, helical gears made of alloy steel. All gears are crown shaved, carburized, hardened, have groundbores and are splash lubricated.
• 17-4 stainless steel impeller shaft, heat-treated, machined and ground to precision (optional K500 Monel shaft only available with K and T transmissions).
• Oil- or grease-lubricated deep-groove ball bearings, situated outside the pump casing for accurate alignment.
• Fully-enclosed, bronze, double-hubbed, precision-balanced impeller (flame-plated hubs for extreme wear resistance optional).
• Bronze replaceable wear rings to increase pump life and minimize maintenance costs.
• Shaft seal comes standard with face-type, self-adjusting corrosion- and wear-resistant mechanical seals.
• 5-Year Limited Warranty.

---

< Back to Top

• Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
• Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
• Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
• Corrosion Protection: Replaceable zinc element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the zinc element to galvanic corrosion.
• Discharge Valves: Your choice of the trusted Waterous 1/4 turn 2.5" and 3.5" ball-type discharge valve or a 4" ANSI flanged discharge valve. Both options come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
• Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
• Intake Fittings: Choose from three styles of intakes, including a 5" or 6" Threaded intake (model CXR), a 6" Flanged intake (model CXN), and a 6" Victaulic(R) intake (model CXV). Note: Threaded intake available with 2.5" to 3" auxiliary intake ports.
• Foam Manager: Consisting of a 500 or 1000 GPM foam manifold and foam proportioner.
• Total Protection Package (TPP-5): The Total Protection Package is a comprehensive warranty that increases your standard warranty to include labor expenses to dismantle, remove and reinstall covered products or parts.

---

< Back to Top

---

< Back to Top

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance

Phone: 651-450-5200

Fax: 800-488-1228

service@waterousco.com

---

< Back to Top