 |
|
|
|
|
Vehicle Mounted: Model HL200/HL300
Global Pump Power. |
|
Specifically designed for installation in international-style fire vehicles, the compact, rear-mounted HL series pumps have built-in high-pressure relief valves. The HL200 has ratings from 2000 L/min @ 10 bar (low pressure) to 400 L/min @ 40 bar (high pressure). The HL300 has ratings from 3000 L/min @ 10 bar (low pressure) to 400 L/min @ 40 bar (high pressure) that may also provide brigades with pumps capable of high and low pressure simultaneously. Both HL models are backed by an industry exclusive five-year warranty. |
HL Series
|
|
| |
|
| |
|
- A rugged and corrosion-resistant, yet light and low-maintence construction--entire pump weighs less than 240* lbs. (107 kg). *HL200 only
- Bronze high-pressure impeller; wear-resistant anodized aluminum low-pressure impeller; low pressure impeller has flame-plated hubs.
- Built-in high-pressure relief valve.
- Pump body and pedestal cast from corrosion-resistant anodized aluminum.
- Easily accessible high-pressure strainer.
- Stainless-steel impeller shaft, heat-treated, machined and ground to precision.
- Bronze replaceable wear rings to increase pump life and minimize maintenance costs.
- Maintenance-free, self-adjusting shaft seal.
- Anodized aluminum 4 inch BSP threaded intake with a 30° droop and two auxiliary 4 inch side flanges.
- Discharge manifold constructed of corrosion-resistant anodized aluminum has six discharge outlets.
- Two anodized aluminum low pressure non-return discharge valves with 2.5 inch BSP (HL200 only).
- Interstage crossover valve assembly incorporates both a high-pressure relief valve and removable strainer for the high-pressure stage inlet.
- Waterous automatic double-piston primers.
- Meets EN 1028-1 and EN 1028-2 standards.
- 5-year warranty.
|
< Back to top |
| |
|
|
| |
|
| |
|
- The Waterous Round-the-Pump Foam Proportioner is an easy-to-use, compactly designed unit capable of retrofitting on any Waterous HL series pump. It has preset positions for 1%, 3%, or 6% proportioning, with foam pick-up connections for either an on-board tank or foam container, and provides foam to high and low pressure discharges.
- Bronze (gunmetal) construction.
|
< Back to top |
| |
|
|
| |
|
| |
|
|
| |
|
| |
|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Sales/Applications Assistance
Phone: 651-450-5234 (Press 3)
sales&service@waterousco.com
Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228
sales&service@waterousco.com |
< Back to top |
| |
|
|
