CXD / CXSD

The CX / CXS Series Pump is the most versatile pump offered by Waterous. When you need the performance of a larger split-shaft pump, but just don’t have the compartment space, the CX / CXS is the answer.


When used with a TC20 Series Power Take-Off (PTO), the CX / CXS can be rear-mounted in an apparatus.

CXSD (Front View)

More Views

  • CXSD (Front View)
  • CXSD (Rear View)
  • CXD (Rear View)
  • CXD (Front View)
CXC20 / CXSC20 FLOW
GPM 750, 1000, 1250, 1500*
l/min 3000, 4000, 5000, 6000*
l/sec 50, 65, 80, 100*
CX / CXS PRESSURE
PSI Bar kPa MPa
150 10 1000 1.0
       

Specifications

  • Cast ductile iron body
  • Dual stripping edge volute
  • Passive lubrication system
  • Self-adjusting mechanical seal
  • Mechanically and hydraulically balanced impeller
  • Replaceable bronze wear rings
  • All deep-groove anti-friction ball bearings, oil-splash lubricated
  • 5-inch ANSI flange or optional end flanged discharge manifold
  • 5-Year Limited Warranty

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
  • Corrosion Protection: Replaceable zinc element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the zinc element to galvanic corrosion.
  • Discharge Valves: Your choice of the trusted Waterous 1/4 turn 2.5" and 3.5" ball-type discharge valve or a 4" ANSI flanged discharge valve. Both options come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
  • Intake Fittings: Choose from three styles of intakes, including a 5" or 6" Threaded intake (model CXR), a 6" Flanged intake (model CXN), and a 6" Victaulic(R) intake (model CXV). Note: Threaded intake available with 2.5" to 3" auxiliary intake ports.
  • Foam Manager: Consisting of a 500 or 1000 GPM foam manifold and foam proportioner.
  • Total Protection Package (TPP-5): The Total Protection Package is a comprehensive warranty that increases your standard warranty to include labor expenses to dismantle, remove and reinstall covered products or parts.

            

CXD/ CXSD
Dimensional Drawings Data Sheet Instructions Performance Curves

Performance Sheets

Service Parts Lists Spec Sheets

 

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com

© Copyright Waterous 2017 | All Rights ReservedDisclaimer