CPK-2

The CPK-2 is driven by a K Series Transmission side mounted PTO and is able to accommodate multiple lines for straight stream or fog nozzles.

CPK-2 (Front View)

More Views

  • CPK-2 (Front View)
  • CPK-2 Rear View
  • K Series Transmission
  • China Compulsary Certification (CPK-2 Models Only)
  • CE Mark - Europe
  • Meets or Exceeds National Fire Protection Association Standards
CPK-2 PERFORMANCE
  GPM L/min L/sec PSI Bar kPa MPa
MAXIMUM FLOW 300 1100 18 150 10 1000 1.0
MAXIMUM PRESSURE 60 200 3 400 28 2800 2.8

Specifications

  • High tensile, close-grained gray iron casing (bronze/gunmetal optional), one-piece volute body
  • 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)
  • Bronze double-hubbed precision-balanced impeller
  • 3-inch (76.2mm) NPT or BSP intake; 2-inch (50mm) NPT or BSP discharge (BSP threads available straight or tapered)
  • Multiple gearbox mounting positions (horizontally, vertically or inverted)
  • Seven optional speed-increasing transmission ratios
  • Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears
  • K Transmission consists of a close-grained, gray iron casing with constant-mesh, stainless steel helical gears
  • 5-year Limited Warranty

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
  • Corrosion Protection: Replaceable zinc element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the zinc element to galvanic corrosion.
  • Discharge Valves: Your choice of the trusted Waterous 1/4 turn 2.5 inch and 3.5 inch ball-type discharge valve. Both options come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
  • Tachometer: Tachometer drive standard and operates at 1/2 input shaft speed.

 

 CPK-2 Series 
Pump Information  Transmission Information
Dimensional Drawings Data Sheet Instructions Performance Curve

Performance Sheets

Service Parts Lists Spec Sheets
 Dimensional Drawings Data Sheet Instructions  Service Parts Lists

Specification Sheet

Miscellaneous Items

 

 

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com

© Copyright Waterous 2017 | All Rights ReservedDisclaimer