CSC20 / CSUC20

Designed with a two-piece, horizontally-split body with intake and discharge passageways in a single casting and on the same level. This design provides the lowest possible height, a lower center of gravity and more room for hose reels, hose beds and other equipment.

The CS/CSU Split-Shaft model is equipped with a chain-driven C20 Transmission. The C20 Transmission provides the best In-Class power transfer. The silent chain drive provides no gear whining, provides positive shifting and requires less horespower that will enhance the efficiency of the apparatus.
CSC20 / CSUC20 (Front View)

More Views

  • CSC20 / CSUC20 (Front View)
  • CSC20/ CSUC20 (Rear View)
  • C20 Transmission
CS FLOW
GPM 750, 1000, 1250
l/min 3000, 4000, 5000
l/sec 50, 65, 80
CS PRESSURE
PSI Bar kPa MPa
150 10 1000 1.0
       
CSU FLOW
GPM 1500, 1750, 2000, 2250
l/min 6000, 7000, 8000, 9000
l/sec 100, 115, 130, 150
CSU PRESSURE
PSI Bar kPa MPa
150 10 1000 1.0
       

Specifications

  • Flame-plated impellers (standard on CSU, optional on CS)
  • Two-piece, horizontally-split, high-tensile strength cast iron pump casing
  • Optional bronze/gunmetal pump casing
  • All deep-groove oil and grease lubricated ball bearings located outside the pump casing
  • Bronze double-hubbed accurately balanced impeller
  • Stainless steel separable impeller shaft
  • Replaceable bronze impeller rings
  • Flinger rings mounted on impeller shaft
  • Adjustable BFG packing standard (spring-loaded mechanical seal available)
  • C20 Transmission consisting of an aluminum case and chain-driven for silent operation
  • Maximum Pump Pressure: 400 PSI (34 bar)

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
  • H-Manifold Discharge Fitting: Allows for efficient and easy installation of a Waterous pump and significantly improves manufacturing process throughput. Flexible design enables OEM's to easily adapt to customers' needs with a wide range of discharge openings. The H-manifold discharge arrangement creates panel dimensions that accommodate remote locking and quarter-turn valves.
  • Corrosion Protection: Replaceable zinc element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the zinc element to galvanic corrosion.
  • Discharge Valves: Your choice of the trusted Waterous 1⁄4 turn 2.5 inch and 3.5 inch rack and sector push-pull, worm gear and electric discharge valves. All come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
  • Foam Manager: Consisting of a 500 or 1000 GPM foam manifold and foam proportioner.
  • Tank to Pump Valve: A full-flow 3.5-inch diameter ball valve, which is attached directly to the pump.
  • Tachometer: Tachometer drive standard and operates at 1/2 input shaft speed.
  • Power Shift: Pneumatic shift allows operator to shift from ROAD to PUMP position by actuating a valve
  • 5-Year Limited Warranty with Total Protection Package (TPP-5): The Total Protection Package is a comprehensive warranty that increases your standard warranty to include labor expenses to dismantle, remove and reinstall covered products or parts.

 

 CSC20 / CSUC20 Series 
Pump Information  Transmission Information
Dimensional Drawings Data Sheet Instructions Performance Curves Performance Sheets Service Parts Lists Spec Sheets Preferred Specifications  Dimensional Drawings Data Sheet Instructions Service Parts Lists Miscellaneous Items      

 

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance Phone: 651-450-5200 Fax: 800-488-1228

service@waterousco.com

© Copyright Waterous 2017 | All Rights ReservedDisclaimer