CPK-3

The CPK-3 is a compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires. Equipped with a K-Series, gear-driven transmission designed for use with a side-mounted PTO.

Request More Information
CPK-3 PERFORMANCE
 GPML/minL/secPSIBarkPaMPa
MAXIMUM FLOW5002000331501010001.0
MAXIMUM PRESSURE6020038005555005.5

Specifications

  • High tensile, close-grained gray iron casing (bronze/gunmetal optional), one-piece volute body
  • Bronze double-hubbed, precision-balanced impellers
  • Separable impeller shaft for ease of serviceability
  • Push-pull manual bronze transfer valve
  • Available in either rotation of input shaft
  • 4-inch (101.4mm) NPT tee adapter intake; two 2-inch (50mm) or 2.5-inch (64mm)
  • NPT tee adapter (or 2.5-inch (64mm) tapped flange) discharge
  • K Transmission consists of a close-grained, gray iron casing with constant-mesh, stainless steel helical gears
  • Seven optional speed-increasing transmission ratios
  • 5-year Limited Warranty

Options and Accessories

  • Priming System: An electric, oil-free rotary vane primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
  • Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by "dumping" excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
  • Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
  • Corrosion Protection: Replaceable zinc element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the zinc element to galvanic corrosion.
  • Discharge Valves: Your choice of the trusted Waterous 1/4 turn 2.5" and 3.5" ball-type discharge valve or a 4" ANSI flanged discharge valve. Both options come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
  • Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator's panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
  • Tachometer: Tach. drive standard and operates at 1/2 input shaft speed.

 

 CPK-3 Series 
Pump Information Transmission Information
Dimensional Drawings Data Sheet Instructions Performance Curve Performance Sheets Service Parts Lists Spec Sheets Dimensional Drawings Data Sheet Instructions  Service Parts Lists Specification Sheet Miscellaneous Items

 

 

 

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com