- Sales/Preferred Specs
- Waterous University
When you consider that a good PTO driven air compressor system is worth its weight in gold, it’s hard to imagine the value of a Waterous PTO kit to your fire department. Waterous offers three models available as OEM installation or retrofit. These CAFSystems™ are water-cooled and designed to discharge water, foam solution or compressed air. They come with a GHH Rand rotary screw airend with integral speed increasing gear set, a 1310 shaft yoke and free on-site orientation. What’s more, all units are available with Advantus® Foam Systems or Aquis™ Foam Proportioners.
Air Compressor: GHH‐Rand airend with tapered roller bearings and triple lip shaft seal, oilflooded, rotary screw type, sized to supply 140 scfm (3.9 m3/min) or 200 scfm (5.6 m3/min) of usable air.
Pneumatic Modulating Inlet Valve: The air compressor is controlled by the pneumatic modulation inlet valve mounted on the air end. The pneumatic modulation inlet valve controls air delivery while maintaining constant pressure.
Electric Auto Sync Balancing System: Automatically maintains the air pressure within +/‐ 5% of the water pump pressure throughout the pressure range. The Auto Sync Balancing System is located on the operator's panel and allows for the following modes: Automatic ‐ Air pressure matched to water pressure Fixed ‐ Air pressure defaults to manual setting on compressor mounted control valve. Unload ‐ Air pressure reduced to 40 psig for standby operations Run ‐ Air compressor in run operation. Air pressure determined by Auto or Fixed setting.
Air Compressor Oil System: A spin‐on, full‐flow oil filter unit and a thermostatic valve are all part of the system to control oil flow to the cooler. All lines are routed in braided hose conforming to SAE 100R1 standards for hydraulic hose.
Modular Air/Oil Separator: Replacement elements for the oil filter and separator are available.
Air Compressor Cooling System: The air compressor is cooled by the unit's water pump, utilizing a copper and brass shell and tube heat exchanger. When the fire pump is operating, water flows through the heat exchanger while an in‐line removable strainer, on the water inlet side, prevents clogging. The system maintains recommended operating temperatures throughout the full operational range in ambient temperatures up to 115°F (46.1°C).
Air Compressor System Protection: A warning system in the hydraulic oil system alerts the operator of high temperature. A warning light and audible alarm are provided for mounting on the pump operator's panel.
Controls and Instruments: The following controls and instruments are provided for mounting on the pump operator's panel:
Auto/Sync compressor controls w/engraved instruction plate
Air compressor temperature gauge w/250° warning switch
NFPA required warning and instruction plates
|Service Parts Lists|
Industry-leading sales and support.
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.
Phone: 651-450-5234 (Press 3)