-
CPK-5 Ultra-High Pressure Pump
$1.00 Add to cartCPK-5 Ultra-High Pressure Pump
Waterous’ latest innovation in the ARFF pump segment is the CPK-5 Ultra-High Pressure Package. Designed to flow 320 GPM @ 1350 psi (1200 l/min @ 93 bar), the CPK-5 meets the requirements of NFPA 414 for Class 4 or 5 ARFF vehicles and NFPA 1910 for Ultra-High Pressure Pump requirements. To meet the municipal NFPA 1901 requirement for Normal Pressure Fire Pumps, a separate CPK-2 pump driven off the transmission PTO can be used.
NOTE: Net Positive Suction Head Required (NPSHR): 30 feet (9.1 m) H20 at 60° F (16° C).
The entire compact sized package for ARFF Class 4 and 5 consists of the following:
- CPK-5 Pump
- CPK-2 Pump
- TQC Power Take-Off
- Transmission Cooling System
$1.00
View Product Details
-
CPT-4 – Power Line Insulator Washing
$1.00 Add to cartCPT-4 – Power Line Insulator Washing
Hot Line Insulator Washing – Hot Line Washing is basically a procedure where insulators on electrical lines are cleaned with water while the electricity is energized (on). If the insulators are not cleaned, a flashover may occur causing brownouts, blackouts and damaged equipment. The Waterous CPT-4 pump is an ideal solution for hot line insulator washing. With pressures up to 800 PSI (55 bar), the insulators can be cleaned while power is still supplied to customers.
$1.00
View Product Details
-
CPT-4UHP
$1.00 Add to cartCPT-4UHP
This ultra high-pressure performer is a lightweight four-stage centrifugal pump that delivers 90 GPM (341 l/ min) at 1350 PSI (93 bar) to produce high-pressure fog, which can knock out fires quickly while the pumper is either in motion or stationary.
$1.00
View Product Details
-
CR / CRU
$1.00 Add to cartCR / CRU
The rugged and reliable Waterous CR / CRU single-stage centrifugal fire pump provides the discerning pro a large capacity pump either pedestal-mounted (CR, CRU models) or with an optional chain-driven transmission (CRQA, CRQB, CRUQB). This CR end-suction pump has a water delivery rated at 2050 GPM @ 250 PSI (7760 L/min. @ 17 bar). The CRU end-suction pump has a water delivery rated at 2640 GPM @ 250 PSI (10000 L/min @ 17 bar). Like all of our pumps, the CR and CRU single-stage centrifugal fire pumps are tested at full power prior to shipment to ensure they meet each one of our rigorous standards.
$1.00
View Product Details
-
CZ / CZU
$1.00 Add to cartCZ / CZU
In the flexible CZ/CZU pumps, Waterous provides ARFF specialists pedestal-mounted, single-stage centrifugal fire pumps with water delivery performances up to 950 GPM @ 260 PSI (3600 L/min. @18 bar) with 5″ Victaulic® inlet or (CZU) up to 1500 GPM @ 250 PSI (5678 L/min @ 17 bar) with 6″ Victaulic® inlet. With vertically-split cases, the CZ pump offers easy operation and simplified maintenance.
$1.00
View Product Details
-
E501-C / E511-C
$1.00 Add to cartE501-C / E511-C
The E500 Series Motor Pump is specifically designed for mounting on specialized attack vehicles. Equipped with Kubota 899cc diesel engine and Waterous fire pump. Available in two models: E501 or E511.
$1.00
View Product Details
-
ECLIPSE ™
$1.00 Add to cartECLIPSE ™
Used by more fire departments around the world than any other CAFSystem, the Eclipse™ CAFSystem from Waterous is easy to operate, incredibly efficient and a proven performer. The Eclipse™ CAFSystem buttresses your attack capabilities with big flow rates up to 2,250 GPM, pressures up to 150 PSI and impressive suppression results.
$1.00
View Product Details
-
ECLIPSE GEN 2.0 Model 150-ECL
$1.00 Add to cartECLIPSE GEN 2.0 Model 150-ECL
When it comes to compressed air foam systems, nothing can match the ease of use of the ECLIPSE Gen 2.0 CAFSystem. ECLIPSE Gen 2.0 incorporates a powerful integrated midship-mounted air compressor system and Waterous engineered FOAMULATORS. ECLIPSE Gen 2.0 CAFSystem have pre-set flow rates and pre-set pressures for water and air. The operator does not have to adjust flows and pressures.
$1.00
View Product Details
-
ECLIPSE™ ES
$1.00 Add to cartECLIPSE™ ES
The Eclipse ES™ compressed air foam system is proof that you can still get serious power out of a tiny package. Unmatched in the industry for performance and versatility, the Eclipse ES™ is available in multiple configurations to fit your needs while providing unmatched fire extinguishing capabilities.
$1.00
View Product Details
-
FireTroll
$1.00 Add to cartFireTroll
The Waterous Fire Troll Foam Proportioning System is an easy to operate system that can be inserted in the plumbing between the pump outlet and the live reel or other discharge points on the fire engine or can be inserted in a hose lay at any location.
$1.00
View Product Details
-
FoamFill Foam Tank Refill System
$1.00 Add to cartFoamFill Foam Tank Refill System
The Waterous FoamFill™ Foam Tank Refill System is completely-automated, making it easier, safer, cleaner and quicker to top off the foam tank or tanks in your apparatus.Waterous FoamFill™ Foam Tank Refill System can be used with both Class A and B foam. When turned on, a microcontroller inside the FoamFill™ identifies the foam levels in the tank or tanks. If the levels are low, FoamFill™ automatically fills them without overflowing, operating at a capacity of 10 GPM (37.8 L/min.).
$1.00
View Product Details
-
PB18 Series
$1.00 Add to cartPB18 Series
The Waterous PB18 series features four portable pump models. Each PB18 is equipped with a Briggs & Stratton 18hp (13kW) V-Twin gasoline engine and is available with no base or rail base option. Fuel tank is 3-gallon (11 liter) fuel tank that meets the EPA evaporative requirement (40 CFR Part 1060).
$1.00
View Product Details
-
PB18 Series With Wrap-Around Frame
$1.00 Add to cartPB18 Series With Wrap-Around Frame
TThe Waterous PB18 with Wrap-Around frame features four portable pump models. Each PB18 is equipped with a Briggs & Stratton 18hp (13kW) V-Twin gasoline engine with 9 Qt (9.5 L) top mounted fuel tank. NOTE: Wrap-Around frame models are CE Marked.
$1.00
View Product Details
-
RF600
$1.00 Add to cartRF600
The RF−600’s hydraulic design allows a nominal 600 GPM rating with generous surplus capacity. In situations where a standard PTO refueler pump cannot provide the necessary power, the RF−600 is the right choice. Compact and lightweight, the RF−600 is built to accommodate the chassis of most commercially built fire trucks and tankers. The split shaft pump transmission and the pump are engineered and built by Waterous, the leading manufacturer of mid−ship fire pumps using split shaft transmissions. Additional transmissions are available if a PTO is desired or if direct-engine mounting is required.
$1.00
View Product Details
-
RTP Foam System
$1.00 Add to cartRTP Foam System
The Waterous Around-The-Pump (RTP) Foam System is a simple and inexpensive way to add foam capability to all discharges of the fire pump. The Waterous RTP Foam System consists of an eductor (jet pump) and panel mounted foam proportioning valve. A table on the foam control panel makes setting the proportioner for 1, 3 and 6% foam easy and accurate.
$1.00
View Product Details
-
TMR – Reversing Transmission for Hi-Rail Applications
$1.00 Add to cartTMR – Reversing Transmission for Hi-Rail Applications
To show the diversity of Waterous products, we developed a transmission for a vehicle which can operate both on rail tracks and a conventional road. The Hi-Rail, from highway and rail equipped with a Waterous TMR Transmission allows the vehicle to travel forward or backwards without having to change the vehicle’s transmission setting saving wear and tear on the vehicle transmission.
$1.00
View Product Details