Showing 1–16 of 80 results

  • ESU1C22

    Read more

    ESU1C22

    Get the power and performance of a traditional full-body fire pump in a compact, lightweight design. Available as a direct-driven pump or matched with a Waterous split-shaft aluminum-case transmission.

    The ESU1 Split-Shaft model is equipped with a chain-driven C22 Transmission. The C22 Transmission provides the best In-Class power transfer. The silent chain-drive provides no gear whining, provides positive shifting and requires less horsepower that will enhance the efficiency of the apparatus.

  • View Product Details
  • Venturis Industrial Air Primer

    $1.00
    Add to cart

    Venturis Industrial Air Primer

    The basic system consists of two Venturis air primers, two priming valves, an auto or manual-prime control panel, and a compressed air supply equipped with a pressure protection valve. Additional components, or a combination of components, allow you to operate the system from multiple locations and prime multiple locations individually or simultaneously.

    $1.00
  • View Product Details
  • Worry-Free Pump Package

    $1.00
    Add to cart

    Worry-Free Pump Package

    We face new challenges it seems on a daily basis. One challenge you shouldn’t have to worry about is your fire pump. Ask for the Waterous Worry-Free Pump Package and receive assurances that your pump is protected by our 7-year parts warranty and, at no cost, our 5-year labor coverage (TPP-5).  Additional components of the Worry-Free Pump Package protect not only your fire pump but protect the everyday heroes who put their lives on the line everyday. Contact your Waterous Sales Representative for more information.

    $1.00
  • View Product Details
  • 80-P

    $1.00
    Add to cart

    80-P

    When you consider that a good PTO driven air compressor system is worth its weight in gold, it’s hard to imagine the value of a Waterous PTO kit to your fire department. Waterous offers three models available as OEM installation or retrofit. These CAFSystems™ are water-cooled and designed to discharge water, foam solution or compressed air. They come with a Rand rotary screw airend with integral speed increasing gear set, a 1310 shaft yoke and free on-site orientation. What’s more, all units are available with Aquis™ Foam Proportioners.

    SKU: sku_64 Categories: ,
    $1.00
  • View Product Details
  • 140, 200-P

    $1.00
    Add to cart

    140, 200-P

    When you consider that a good PTO driven air compressor system is worth its weight in gold, it’s hard to imagine the value of a Waterous PTO kit to your fire department. Waterous offers three models available as OEM installation or retrofit. These CAFSystems™ are water-cooled and designed to discharge water, foam solution or compressed air. They come with a Rand rotary screw airend with integral speed increasing gear set, a 1310 shaft yoke and free on-site orientation. What’s more, all units are available with Aquis™ Foam Proportioners.

    SKU: sku_38 Categories: ,
    $1.00
  • View Product Details
  • 70-35-GP

    $1.00
    Add to cart

    70-35-GP

    The 70-35-GP is a slide-in, portable compressed air foam system designed and constructed to discharge water, foam solution or compressed air foam. The system delivers a minimum of 70 GPM of water at 100 PSIg (265 L/min. @ 6.9 bar) and 35 CFM of air at 100 PSIg (0.9 m3/min @ 6.9 bar) and compressed air foam discharge pressure up to 130 PSIg (9 bar).

    SKU: sku_32 Categories: , ,
    $1.00
  • View Product Details
  • 90-45-DS

    $1.00
    Add to cart

    90-45-DS

    Our slide-in, portable modular compressed air foam 90-45 unit is designed and constructed to simultaneously discharge water, foam solution or compressed air foam, developing 90 GPM of water at 100 PSIg (340 L/min. @ 6.9 bar) and 45 CFM of air at 100 PSIg (1.2 m3/min @ 6.9 bar). The 90-45-DS also features compressed air for pneumatic tools and can pump water or air independently.

    SKU: sku_33 Categories: , ,
    $1.00
  • View Product Details
  • 90-45-ECL

    $1.00
    Add to cart

    90-45-ECL

    Our slide-in, portable modular compressed air foam 90-45-ECL unit is designed and constructed to simultaneously discharge water, foam solution or compressed air foam, developing 90 GPM of water at 100 PSIg (340 L/min. @ 6.9 bar) and 45 CFM of air at 100 PSIg (1.2 m3/min @ 6.9 bar). The 90-45-ECL also features compressed air for pneumatic tools and can pump water or air independently.

    SKU: sku_85 Categories: , ,
    $1.00
  • View Product Details
  • 150-70-DS

    $1.00
    Add to cart

    150-70-DS

    The 150-70-DS isn’t your typical water pump. The slide-in, modular compressed air foam unit is designed and constructed to simultaneously discharge water, aspirated foam, foam solution or compressed air foam, delivering 150 GPM of water at 150 PSIg (567 L/min. @ 10 bar) and 70 CFM of air at 125 PSIg (1.97 m3/min @ 8.6 bar). The 150-70-DS also provides compressed air for pneumatic tools.

    SKU: sku_94 Categories: , ,
    $1.00
  • View Product Details
  • 150-70-ECL

    $1.00
    Add to cart

    150-70-ECL

    The 150-70-ECL isn’t your typical water pump. The slide-in, modular compressed air foam unit is designed and constructed to simultaneously discharge water, aspirated foam, foam solution or compressed air foam, delivering 150 GPM of water at 150 PSIg (567 L/min. @ 10 bar) and 70 CFM of air at 125 PSIg (1.97 m3/min @ 8.6 bar). The 150-70-ECL also provides compressed air for pneumatic tools.

    SKU: sku_95 Categories: , ,
    $1.00
  • View Product Details
  • 200-100-DS

    $1.00
    Add to cart

    200-100-DS

    The 200-100-DS isn’t your typical water pump. The slide-in, modular compressed air foam unit is designed and constructed to simultaneously discharge water, aspirated foam, foam solution or compressed air foam, delivering 200 GPM of water at 125 PSIg (800 L/min. @ 8.6 bar) and 100 CFM of air at 125 PSIg (2.83 m3/min @ 8.6 bar). The 200-100-DS also provides compressed air for pneumatic tools.

    SKU: sku_34 Categories: , ,
    $1.00
  • View Product Details
  • 200-100-ECL

    $1.00
    Add to cart

    200-100-ECL

    The 200-100-ECL isn’t your typical water pump. The slide-in, modular compressed air foam unit is designed and constructed to simultaneously discharge water, aspirated foam, foam solution or compressed air foam, delivering 200 GPM of water at 125 PSIg (800 L/min. @ 8.6 bar) and 100 CFM of air at 125 PSIg (2.83 m3/min @ 8.6 bar). The 200-100-ECL also provides compressed air for pneumatic tools.

    SKU: sku_86 Categories: , ,
    $1.00
  • View Product Details
  • 250-100-P / 250-120-P

    $1.00
    Add to cart

    250-100-P / 250-120-P

    Part pump, part compressor, all CAFS fire suppressing power. Waterous has several PTO-driven Integrated Pump/Compressor Systems available to meet your department’s needs. These models deliver everything you’d expect in a CAFS unit, including the ability to discharge water, foam solution and compressed air for pneumatic tools. They also include a rotary screw airend with poly-chain.

    SKU: 250-100-P-250-120-P Categories: ,
    $1.00
  • View Product Details
  • 500-80-P, 500-120-P, 500-150-P

    $1.00
    Add to cart

    500-80-P, 500-120-P, 500-150-P

    Part pump, part compressor, all CAFS fire suppressing power. Waterous has several PTO-driven Integrated Pump/Compressor Systems available to meet your department’s needs. These models deliver everything you’d expect in a CAFS unit, including the ability to discharge water, foam solution and compressed air for pneumatic tools. They also include a rotary screw airend with poly-chain.

    SKU: sku_65 Categories: ,
    $1.00
  • View Product Details
  • 750-100-P, 750-150-P

    $1.00
    Add to cart

    750-100-P, 750-150-P

    Part pump, part compressor, all CAFS fire suppressing power. Waterous has several PTO-driven Integrated Pump/Compressor Systems available to meet your department’s needs. These models deliver everything you’d expect in a CAFS unit, including the ability to discharge water, foam solution and compressed air for pneumatic tools. They also include a rotary screw airend with poly-chain.

    SKU: sku_37 Categories: ,
    $1.00
  • View Product Details
  • 1000-100, 1000-150, 1250-100, 1250-150-P

    $1.00
    Add to cart

    1000-100, 1000-150, 1250-100, 1250-150-P

    Part pump, part compressor, all CAFS fire suppressing power. Waterous has several PTO-driven Integrated Pump/Compressor Systems available to meet your department’s needs. These models deliver everything you’d expect in a CAFS unit, including the ability to discharge water, foam solution and compressed air for pneumatic tools. They also include a rotary screw airend with poly-chain.

    SKU: sku_66 Categories: ,
    $1.00
  • View Product Details