Showing all 7 results

  • CRU-2 High Flow Series Pump

    $1.00
    Add to cart

    CRU-2 High Flow Series Pump

    Waterous CRU-2 single-stage centrifugal high-flow pump mated to C23 or QC chain-driven transmission or driven by a TC23 split-shaft PTO can be utilized in municipal firefighting, aircraft firefighting, dewatering or for industrial applications.

    $1.00
  • View Product Details
  • CXK / CXPA

    $1.00
    Add to cart

    CXK / CXPA

    The CX series is a single-stage, end-suction pump that is driven by a transmission side-mounted PTO or a chain-driven transmission.

    The PTO-Driven CX Series is available with a K-Series, gear-driven transmission designed for use with a side-mounted PTO or a PA Series, chain-driven transmission designed for use with an Allison Transmission with 10-bolt PTO.

    $1.00
  • View Product Details
  • CPK-5 Ultra-High Pressure Pump

    $1.00
    Add to cart

    CPK-5 Ultra-High Pressure Pump

    Waterous’ latest innovation in the ARFF pump segment is the CPK-5 Ultra-High Pressure Package. Designed to flow 320 GPM @ 1350 psi (1200 l/min @ 93 bar), the CPK-5 meets the requirements of NFPA 414 for Class 4 or 5 ARFF vehicles and NFPA 1910 for Ultra-High Pressure Pump requirements. To meet the municipal NFPA 1901 requirement for Normal Pressure Fire Pumps, a separate CPK-2 pump driven off the transmission PTO can be used.

    NOTE: Net Positive Suction Head Required (NPSHR): 30 feet (9.1 m) H20 at 60° F (16° C).

    The entire compact sized package for ARFF Class 4 and 5 consists of the following:

    • CPK-5 Pump
    • CPK-2 Pump
    • TQC Power Take-Off
    • Transmission Cooling System
    $1.00
  • View Product Details
  • CPT-4UHP

    $1.00
    Add to cart

    CPT-4UHP

    This ultra high-pressure performer is a lightweight four-stage centrifugal pump that delivers 90 GPM (341 l/ min) at 1350 PSI (93 bar) to produce high-pressure fog, which can knock out fires quickly while the pumper is either in motion or stationary.

    $1.00
  • View Product Details
  • CR / CRU

    $1.00
    Add to cart

    CR / CRU

    The rugged and reliable Waterous CR / CRU single-stage centrifugal fire pump provides the discerning pro a large capacity pump either pedestal-mounted (CR, CRU models) or with an optional chain-driven transmission (CRQA, CRQB, CRUQB). This CR end-suction pump has a water delivery rated at 2050 GPM @ 250 PSI (7760 L/min. @ 17 bar). The CRU end-suction pump has a water delivery rated at 2640 GPM @ 250 PSI (10000 L/min @ 17 bar). Like all of our pumps, the CR and CRU single-stage centrifugal fire pumps are tested at full power prior to shipment to ensure they meet each one of our rigorous standards.

    $1.00
  • View Product Details
  • CZ / CZU

    $1.00
    Add to cart

    CZ / CZU

    In the flexible CZ/CZU pumps, Waterous provides ARFF specialists pedestal-mounted, single-stage centrifugal fire pumps with water delivery performances up to 950 GPM @ 260 PSI (3600 L/min. @18 bar) with 5″ Victaulic® inlet or (CZU) up to 1500 GPM @ 250 PSI (5678 L/min @ 17 bar) with 6″ Victaulic® inlet. With vertically-split cases, the CZ pump offers easy operation and simplified maintenance.

    $1.00
  • View Product Details
  • RF600

    $1.00
    Add to cart

    RF600

    The RF−600’s hydraulic design allows a nominal 600 GPM rating with generous surplus capacity. In situations where a standard PTO refueler pump cannot provide the necessary power, the RF−600 is the right choice. Compact and lightweight, the RF−600 is built to accommodate the chassis of most commercially built fire trucks and tankers. The split shaft pump transmission and the pump are engineered and built by Waterous, the leading manufacturer of mid−ship fire pumps using split shaft transmissions. Additional transmissions are available if a PTO is desired or if direct-engine mounting is required.

    $1.00
  • View Product Details