• Home |
  • Aquis™ Foam Proportioner

Aquis™ Foam Proportioner

Aquis 1.5 Foam ProportionerAquis 1.5 Foam Proportioner Aquis 3.0 Foam Proportioner Aquis 6.0 Foam Proportioner Meets or Exceeds National Fire Protection Association Standards
Aquis™ Foam Proportioner

It’s not easy to properly proportion fire-suppressing foam. To get the ratios right, you need to compensate for a number of variables. Doing so demands world-class engineering coupled with dependable flow meter technology. In other words, you need The Aquis™ Foam Proportioner from Waterous. It delivers a level of performance and reliability typically reserved for more expensive foam proportioner systems.

Request More Information
Flow / Pressure Specifications Options / Accessories Download Literature International Translations

AQUIS™ 1.5

FOAM OUTPUT
GPML/minL/sec
1.55.7.1
PRESSURE
PSIBarkPaMPa
1501010001.0
MAXIMUM OPERATING PRESSURE
PSIBarkPaMPa
4503232003.2

 

AQUIS™ 3.0

FOAM OUTPUT
GPML/minL/sec
3.011.4.19
PRESSURE
PSIBarkPaMPa
1501010001.0
MAXIMUM OPERATING PRESSURE
PSIBarkPaMPa
4503232003.2

 

AQUIS™ 6.0

FOAM OUTPUT
GPML/minL/sec
6.022.8.38
PRESSURE
PSIBarkPaMPa
1501010001.0
MAXIMUM OPERATING PRESSURE
PSIBarkPaMPa
4503232003.2

Specifications

AQUIS™ 1.5

  • Foam Pump: positive displacement plunger pump
  • Pump Motor: 1/3 HP ( .27 kW)
  • 1-year warranty

AQUIS™ 3.0

  • Foam Pump: positive displacement plunger pump
  • Pump Motor: 1/2 HP ( .40 kW)
  • 1-year warranty

AQUIS™ 6.0

  • Foam Pump: positive displacement plunger pump
  • Pump Motor: 1 HP ( .80 kW)
  • 1-year warranty

Options and Accessories

Optional Items Available from Waterous

  • Foam Tank Switch - Installed in on-board foam tank to communicate low concentrate level to foam pump, has a 24 in. long wire. Note that multiple quantities may be ordered. Available for the following mounting positions:
    • Side Mount in Tank
    • Top or Bottom Mount in Tank
  • Master Waterway Check Valve - Full bodied brass check valve, includes a foam concentrate injection port on the downstream side. Available in the following sizes and end connections:
    • 1.5 in. Victaulic Inlet x FNPT/Victaulic Outlet
    • 1.5 in. FNPT Inlet x FNPT/Victaulic Outlet
    • 2.0 in. Victaulic Inlet x Victaulic Outlet
    • 2.0 in. Victaulic Inlet x FNPT Outlet
    • 2.5 in. Victaulic Inlet x Victaulic Outlet
    • 2.5 in. Victaulic Inlet x FNPT Outlet
    • 3.0 in. Victaulic Inlet x Victaulic Outlet
    • 3.0 in. Victaulic Inlet x FNPT Outlet
  • Manifold with Flowmeter and Check Valve - Simplifies installation as flowmeter and waterway check valve installation is accomplished with one component. Consists of 2.5 in. inside diameter iron manifold with built-in check valve and flowmeter. When ordered, Flowmeter Tee is not furnished and a separate Waterway Check Valve is not needed. Available in the following sizes and end connections:
    • 1.5 in. FNPT / 2.0 in. Victaulic Inlet and Outlet
    • 2.0 in. FNPT / 2.5 in. Victaulic Inlet and Outlet
    • 2.5 in. 4-Bolt Flange Inlet and Outlet
    • 2.5 in. 4-Bolt Flange Inlet and 2.0 in. FNPT / 2.5 in. Victaulic Outlet
    • 2.5 in. 4-Bolt Flange Inlet and 2.5 in. FNPT / 3.0 in. Victaulic Outlet
  • Foam Concentrate Supply Hose Kit - Provides hoses and fittings to bring foam concentrate from an on-board tank to the foam pump. Note that a foam concentrate tank shut-off valve is also included.
  • Foam Concentrate Inject/Bypass Hose Kit - Provides hoses and fittings to bring foam concentrate from the foam pump to injection point, and hose and fittings from foam pump to atmosphere (bypass).
  • OIT/HMI Extension Cable
    • 3 meter or 6 meter lengths available
  • Flowmeter Extension Cable
    • 3 meter length available
  • Tank Level Switch Cable Extension
    • 4 meter length available
  • Foam System Rating Panel Plate
    • Meets requirements of NFPA 1901 and 1906

 

Aquis Foam Systems 
Instructions
Service Parts Lists
Dimensional Drawings
Preferred Specifications
Specification Sheets

Certification Sheets

 

 

Sales/Application/Service Help

Industry-leading sales and support.

When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.

Sales/Applications Assistance

Phone: 651-450-5234 (Press 3)

pumpsales@waterousco.com

Service Assistance
Phone: 651-450-5200
Fax: 800-488-1228

service@waterousco.com

Aquis™ Foam System

espanol


Português

 

中国的