Showing all 10 results

  • VENTURIS

    Venturis Air Primer

    $1.00     Add to cart

    Venturis Air Primer

    An air primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. 

    SKU: sku_96 Category:
    $1.00
    • View Product Details

  • Electric Priming Systems

    $1.00     Add to cart

    Electric Priming Systems

    Priming Systems consists of a VPO electric motor driven rotary vane, oil-less primer mounted directly on a Waterous midship pump transmission or separately mounted. With the priming valve, it forms a complete, dependable, factory installed priming system.

    SKU: sku_63 Category:
    $1.00
    • View Product Details

  • Intake and Discharge Valves

    $1.00     Add to cart

    Intake and Discharge Valves

    The effectiveness of ball-type valves depends greatly upon the tightness of its seal, as a leaking seal allows air to enter the pump during priming, or water to escape when operating. Also, other abrasive materials in the water being pumped can score and roughen the surfaces of the valve parts. The design of the ball and seal have the greatest effect on the life and performance of the discharge valve.

    Waterous has developed the ENDURA™ Valve to incorporate all of the ruggedness of our current valve plus additional features that make it easier to install and easier to perform maintenance. With the patent pending ENDURA™ Seal that provides a positive seal on the valve ball, ENDURA™ Valves also have the following features:

    • Available in 2″ and 2-1/2″ sizes
    • Chromium-plated brass ball valve
    • 4-Bolt pattern allows a wide range of adapters for various connections
    • 8-Position Handle
    • Floating seal assembly with wave spring
    • Seals on the intake side only, provide extra life of the ball
    • Design allows the trunnion to remain centered in valve body, not affected by pressure or volume
    • Multi-purpose drain ports
    • Rated at 600 PSI (41 bar)
    • 7-Year Warranty

    SKU: sku_70-1 Categories: ,
    $1.00
    • View Product Details

  • Pressure Control Systems

    $1.00     Add to cart

    Pressure Control Systems

    The Waterous Intake Relief Valve system is designed to act as a safety valve by “dumping” excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.

    SKU: sku_69 Category:
    $1.00
    • View Product Details

  • Overheat Protection Manager (OPM)

    $1.00     Add to cart

    Overheat Protection Manager (OPM)

    The Waterous Overheat Protection Manager (OPM) acts as a safety device by releasing water from the discharge side of the pump to the ground or back to a water tank once the internal pump water temperature reaches 140°F (60°C).

    SKU: sku_67 Category:
    $1.00
    • View Product Details

  • Fittings – Intake, Discharge and Auxiliary

    $1.00     Add to cart

    Fittings – Intake, Discharge and Auxiliary

    Waterous pumps are available with a variety of intake, discharge and auxiliary fittings. Check the Download section below to find the right fittings for your application.

    SKU: sku_71 Category:
    $1.00
    • View Product Details

  • Drain Valves

    $1.00     Add to cart

    Drain Valves

    Clean up after a fire is hard work. The team at Waterous understands that. Waterous works to make it easier for you and your team.

    The Waterous drain valve is made of stainless steel and a bronze body and allows for simultaneous draining of eight lines!

    Rated up to 600 PSI (41.4 bar)

    Simple operation, easier clean up, Waterous’ drain valves are just a click away!

    SKU: sku_68 Category:
    $1.00
    • View Product Details

  • Power Shift

    $1.00     Add to cart

    Power Shift

    Looking to do fast positive shifting while still in the cab? Take a look at the Power Shift.

    It includes a complete set of indication lights, in accordance with NFPA 1900. These lights indicate when the shift has been completed to PUMP and OK TO PUMP.

    The units also include a manual override provision which allows the pump to be engaged manually in case of an electrical or air system failure.

    SKU: sku_74 Category:
    $1.00
    • View Product Details

  • Anodes – Cathodic Protection

    $1.00     Add to cart

    Anodes – Cathodic Protection

    Galvanic corrosion is huge problem in the water industry. Anytime two different metals are immersed in water and physically or electrically connected a “battery” is formed, as a small amount of current will flow between the two metals. The solution? Cathodic protection. Waterous offers optional corrosion protection with magnesium anodes and zinc intake screens. Click to learn more now and save your parts from galvanic corrosion!

    SKU: sku_73 Category:
    $1.00
    • View Product Details

  • Auto Tank Fill

    $1.00     Add to cart

    Auto Tank Fill

    Do you have an operator constantly monitoring your water tank, and concerns of high hydrant pressure?

    Free up your operator and stop being concerned with high hydrant pressure with the Waterous Auto Tank Fill System!

    Waterous designed this system to solve both of these problems, and it maintains a constant low pressure water supply at the pump intake by automatically filling the water tank and maintaining a water level between 20 and 80%.

    The Auto Tank Fill is designed for any of the Waterous electric-actuated ball valves (sold separately).

    SKU: sku_72 Category:
    $1.00
    • View Product Details