Flow Pressure
Specifications
Options / Accessories
Download Literature
International Translations
| CXT PERFORMANCE | |||||||
|---|---|---|---|---|---|---|---|
| GPM | L/min | L/sec | PSI | Bar | kPa | MPa | |
| MAXIMUM FLOW | 1500 | 5678 | 94 | 150 | 10 | 1000 | 1.0 |
Specifications
- High-tensile, close-grained gray iron (bronze/gunmetal optional), two-piece, vertically-split volute body
- 17-4 stainless steel, heat-treated impeller shaft
- Fully-enclosed, bronze, double-hubbed, precision-balanced impeller
- Bronze replaceable wear rings
- Self-adjusting corrosion- and wear-resistant mechanical seals
- Optional crosspipe intake fitting allows for maximum flow of 1500 GPM (5678 L/min)
- T Series Transmission consists of an aluminum case with constant-mesh, stainless steel helical gears
- 7-year Limited Warranty
Options and Accessories
- Priming System: An electric, oil-free rotary vane primer or air activated primer mounted directly on a Waterous split-shaft pump transmission or separately mounted combined with a Waterous priming valve forms the priming system. A lubrication option allows the use of Prime-Safe lubricant (priming tank is required when the lubrication option is selected).
- Pressure Control System: The Waterous Intake Relief Valve system is designed to act as a safety valve by “dumping” excess pressure from the inlet side of the pump. The Discharge Relief Valve provides sensitive pump control to protect firefighters from sudden pressure surges resulting from changes in discharge flows from the pump.
- Manifold Drain Valve: Drains all points of the pump simultaneously with the operation of a single control.
- Corrosion Protection: Replaceable magnesium element that is installed directly on the pump intake piping and into the pump waterway. These anodes sacrifice the magnesium element to galvanic corrosion.
- Discharge Valves: Your choice of the trusted Waterous 1/4 turn 2.5″ and 3.5″ ball-type discharge valve or a 4″ ANSI flanged discharge valve. Both options come standard with chrome-plated brass ball and hydraulically balanced seal assembly.
- Overheat Protection Manager: The OPM consists of an illuminated warning light on the operator’s panel whenever the pump approaches an overheat condition. Optional audible alarm is available.
- Intake Fittings: Choose from three styles of intakes, including a 5″ or 6″ Threaded intake (model CXR), a 6″ Flanged intake (model CXN), and a 6″ Victaulic(R) intake (model CXV). Note: Threaded intake available with 2.5″ to 3″ auxiliary intake ports.
- Total Protection Package (TPP-5): The Total Protection Package is a comprehensive warranty that increases your standard 7 year warranty to include labor expenses to dismantle, remove and reinstall covered products or parts for a period of five years.
Pump Information
-
Data Sheet
- DS-1010, DATA SHEET
-
Dimensional Drawings
- DPL83916, CX DIMENSIONALS
-
Instructions
- F-3063, OPERATION AND MAINTENANCE
- F-3060, INSTALLATION INSTRUCTIONS
- F-3062, OVERHAUL INSTRUCTIONS
-
Performance Curves
- 810304, CX PERFORMANCE CURVE
-
Performance Sheets
- F-2115, CX PERFORMANCE SHEET
-
Preferred Specifications
- F-2821, CX SERIES
-
Service Parts Lists
- SPL81094, CX SERIES IMPELLER SHAFT ASSEMBLY
- SPL83061, CXS PUMP BODY
-
Spec Sheets
- CX SPECIFICATION SHEET
Transmission Information
-
Data Sheet
- DS-2001, T SERIES DATA SHEET
-
Instructions
- F-2873, T SERIES OPERATION AND MAINTENANCE
- F-2901, T SERIES OVERHAUL
- F-2902 HEAVY DUTY ALUMINUM TK OVERHAUL INSTRUCTIONS
-
Miscellaneous Items
- F-2686, DRIVELINE TORQUE RATING
-
Service Parts Lists
- SPL83743, HEAVY DUTY T TRANSMISSION
-
Specification Sheets
- F-2244, T SERIES TRANSMISSION
CAD FILE DIRECTORY
Pump Information
-
español
- SEC. 2109.1, CX OPERACIÓN Y MANTENIMIENTO
- SEC. 3014, INSTRUCCIONES DE INSTALACIÓN
- F-2095, CX ESPECIFICAÇÃO
-
português
- SEC. 2109-1, INSTRUÇÕES DE OPERAÇÃO
- SEC. 3014, CX INSTRUÇÕES DE INSTALAÇÃO
- CX SERIES, FOLHA DE ESPECIFICAÇÃO
-
中国的
- F-2717, CX 操作和维护
-
français
- F-3060, CX INSTRUCTIONS D'INSTALLATION
- F-3062, CX INSTRUCTIONS DE RÉVISION
- F-3063, CX FONCTIONNEMENT ET ENTRETIEN
Transmission Information
Sales / Application / Service Help
Industry-leading sales and support
When you purchase Waterous equipment, not only do you get quality products, you get quality service. Our expert service technicians are the best in the business and they are always happy to answer any service questions you might have. The numbers for our service and training specialists are listed below for your convenience. If you have a general service question please call our main number and our staff will kindly direct you to the appropriate department.



